Fiat 500 Key Fob Replacement
If your 500 keyfob stops working, use another one to see if it is able to be recognized by the car. If it does, then it could be a problem due to the battery or water damage to the fob that was originally used.
First replace the battery. Make sure the new # CR2032 coin battery is properly inserted with the "+" side facing downwards in the fob.
Dead Battery
The battery is usually the reason for a fob not working. It's easy to solve and most fobs warn you when the battery is dying. You can find instructions on YouTube for almost any key fob in your car or in the owner's manual. You can also take it to an area locksmith or the dealer that supplied it to you to repair it.
Sometimes, a device stops working due to a problem on the internal circuit board. This isn't a lot of common however it can occur. The internal chip may be damaged when you drop the fob on something that is hard. It can also happen if you use an aftermarket key, and the fob doesn't function. In this scenario you'll need to go to a locksmith or dealer and have it reconfigured to work with your 500.
One 2012 FIAT FIAT 500 flip key remote – Looks like Ilco with lock, unlock and trunk buttons - new keyless entry replacement (will need to cut & program by locksmith).
Chip Damaged
A fiat 500 key fob is an electronic device that transmits the signal to the car to start when you push the button. It's equipped with a microchip, which contains information about the code required to communicate with the car. If the chip is damaged, it can't send the correct code, and the car will not start. A locksmith can repair this type damage. United Locksmith can complete this service on both classic and newer models, so do not hesitate to call us.
You can purchase a brand new fob and have it programmed professionally by locksmiths. This is much less expensive than visiting a dealer and will work exactly the same way. You'll need some information for the locksmith, such as the year your car was manufactured and the model.
Rub the chip with an old dollar bill if not sure what to do. The copper in the bill is abrasive enough remove oxidation and dirt, however, it won't cause damage to the microchip. The chip may not be repaired if it is physically damaged. This could happen if you fall it, ram it over with your car, or some other kind of physical strain.
Water Damage
If you've accidentally dropped your keys in the pool, put them in your pocket while swimming at the beach, or splashed them with water during a rainy day it's likely your fob may have water damage. Even if there's only some water on the keys, this could cause serious problems to its electronics and stop it from working properly.
It is possible to solve this issue yourself by taking the fob off and cleaning it with a paper towel. When the fob is dry it is possible to replace its battery and it will begin working again.
You can also take your key fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These professionals will be able to utilize special equipment to make sure that the key fob is compatible with the car's computer system.
If your Fiat 500's keys fob stops working, it can be stressful and frustrating. You may be tempted head to the dealer to replace your key fob but this could be costly and inconvenient. rekey can handle all aspect of the replacement of your car's key fob without the necessity of a dealership visit. For this reason, they are a much better option than an auto dealer.
Pairing Issues
If you drop your keyfob, or it ceases to function and nothing else appears to be wrong, it may be the chip. This can be due to water damage or a dead battery, or it could be that it needs reprogramming.
This can often be done by simply following the directions in your owner's guide. If you're having difficulty or your manual doesn't work and you need to have an automotive locksmith perform this task. This will ensure that the chip isn't fried and will likely be the least expensive option.
Another issue that plagues some 500 owners is that the key fob won't secure the car. This could be a problem when you plan to fill up at a gas station. Some owners have reported that the locking system of their 500 malfunctioned and they've had to replace the entire intermediate steering shaft. This issue was mentioned in a technical service bulletin (TSB) by Fiat.
If you're experiencing issues with your Fiat car, an experienced locksmith could help. They'll duplicate your key or design an entirely new one that can unlock and start your car. They're able to accomplish this without having to see your key, and are typically less expensive than buying it from a dealer.